Performance analysis of two-wheeler bike fins


EOI: 10.11242/viva-tech.01.05.001

Download Full Text here



Citation

Ms. Mayuri C. Khopkar, Aishwarya A. Gawandi, Adityasingh R. Daswani, Madhavi R. Jadhav, "Performance analysis of two-wheeler bike fins", VIVA-IJRI Volume 1, Issue 5, Article 17, pp. 1-6, 2022. Published by Computer Engineering Department, VIVA Institute of Technology, Virar, India.

Abstract

The Engines Cylinder is one of the important parts of an automobile component, which is subjected to high-temperature variations and thermal stresses. To cool the cylinder, fins are provided on the surface of the cylinder to increase the rate of heat transfer. An air-cooled motorcycle engine releases the heat to the atmosphere through the mode of forced convection, fins are provided on the outer surface of the cylinder block of the engine. The fins allow the cooling wind over its surface and transfer heat from the fins surface to the air. The main aim of the project is to analyze the thermal properties like Directional heat flux, total heat flux, the steady-state thermal analysis used to determine temperature distribution. To improve the rate of heat transfer thermal analysis of designs providing slots, reducing the fin thickness and increasing no. of fins. The fins model prepared in SOLIDWORKS2020SP0 and doing the thermal analysis of cylinder block with fins for different materials by using ANSYS2021R1and to find out the best material that gives the better heat transfer rate..

Keywords

Analysis, Fins, Thermal, Two-wheeler, Heat-Transfer.

References

  1. “Hybrid Ecopower Hybrid Ventilator ”https://skylinegroup.co.in/ecopower.html Last Accessed on 5th March, 2020.
  2. "Shankar Durgam*, Aniket Kale, Nikhil Kene, Akshay Khedkar, Sanket Palve, and Nikita M.Gawai, "Thermal analysis of fin materials for engine cylinder heat transfer enhancement",2021.
  3. "A.N.Mohan Das, G. Harish, D.Purrab, J.Sachinand G.Suraj Departmet of Mechanical Engineering, Dayanand Sagar College of Engineering, Bengaluru-560078, India. Departmet of Mechanical Engineering, Visvesvaraya College of Engineering, Bengaluru-560001, India.January -June 2021 .“Transient thermal analysis of different types of IC engine cylinder fins by varying thickness and introducing slots”.
  4. "S. Padmanabhan, S. Thiangrajan, A. Deepan Raj Kumar, D Prabhakaran, "Investigation Of Temperature Distribution Of Fin Profiles Using Analytical And CFD Analysis, "Sept. 2020.
  5. "K. Rama Chandra Manohar, Yakkala M. K. Raghunath, Somnath B. Santosh, "Optimization of Engine Fins Of Varying Heat Transfer And Thermal Conductivity, " 2018.
  6. "Rajat Kumar, Devendra Singh, Ajay Kumar Sharma, “Static Thermal Analysis Of Fins Models Using Ansys.” IJMET, Volume 11, Issue 2, February 2020. Mr. Atul Chandanshive1, Prof. Dr. S. M. Pise2 .“Thermal Analysis and Optimization of Two-Wheeler Engine Cylinder Fins.” IRJET, Volume: 06 Issue: 05 | May 2019.
  7. "Bhuvanesh Kushwah, P.S. Dhakar, “A REVIEW STUDY ON THE THERMAL PERFORMANCE OF ENGINE CYLINDER WITH FINS” JETIR June 2019, Volume 6, Issue 6,2019.