Design And Fabrication Of Automatic Cement Plastering Machine


EOI: 10.11242/viva-tech.01.06.001

Download Full Text here



Citation

Mr. Devendra Dorkar, Mr.Siddhesh Ganpat Neman, Mr. Raj kirankumar Nair, Mr.Aakash Paresh Chauhan, "Design And Fabrication Of Automatic Cement Plastering Machine", VIVA-IJRI Volume 1, Issue 6, Article 1, pp. 1-7, 2023. Published by Computer Engineering Department, VIVA Institute of Technology, Virar, India.

Abstract

The aim of this project is Designing and fabrication of automatic cement plastering machine. This project was driven by specific objective which are to examine for mortaring wall with good finishing surface of uniform thickness by the help of trowel mechanism. Various types of mechanical machine element such as; pulley system and lead screw mechanism is used for lifting mechanism, conveyor for plaster feeding. The main power source of this machine is AC motor were used for dc power with the help of SMPS (Switched Mode Power Supply).The modelled and fabricated AUTOMATIC CEMENT PLASTERING MACHINE must saves man power, raw material, cycle time and rate as compared to manual plastering. Additionally, this automatic cement plastering machine can be used as a finishing technology for both inner and outer walls made from bricks like masonry bricks, thermal bricks etc. This Plastering machine will save higher labour charge required for plastering and also improve the productivity and quality then conventional method. We eventually, the automatic cement plastering machine could play significant role in overall construction projects to reduce project net accomplishing time and increases the net profits.

Keywords

Chain, Conveyor, Designing, Plastering Machine, Pulley, Sprocket, Trowel.

References

  1. Ravi Kumar M. et al., “Development and Fabrication of Semi-Automated Wall Plastering Machine”, ISSN: 0971-1260 Vol-22-Issue-16-August-2019
  2. Ankush N. Askar, et al., “DESIGN OF AUTOMATIC WALL PLASTERING MACHINE”, International Journal of Engineering Sciences & Research Technology, VOLUME 6 ISSUE 3:March, 2017.
  3. Shreeranga Bhatt et al.: “Design and Fabrication of Wall Plastering Machine”, Journal of MechanicalEngineering and Automation 2017, 7(5): 159-163.
  4. Arunkumar Biradar, et al., “Design of Automatic Wall Plastering Machine”, International Journal of Engineering and Technical Research (IJETR) “ISSN: 2321 0869 (O) 2454-4698 (P), Volume-4, Issue-1, January 2016.
  5. Teng Long et al.: “A Novel Measurement and Control Method for Automatic Plastering Machine”, IEEE International Conference of mechatronics and automation (2015); pp. 2-5